HP102 hose hydraulic clamping crimping joint hose crimping machine tool

HP102  Hose  Hydraulic Clamping  Press Fitting Hose Crimping Machines ToolProduct  Despriction                                                             

Featured Products

HP102  Hose  Hydraulic Clamping  Press Fitting Hose Crimping Machines Tool

Product  Despriction                                                                                                                

Hose  crimping machine is mainly used for  buckling  processing  for  high pressure  rubber pipe assembly  in the  materiral engineering .It can  also be  used for buckling  the  two-way  bends,especially large bends and  irregular shape  bends.

HP102 Hose Hydraulic Clamping Press Fitting Hose Crimping Machines Tool

             Hose  Crimping Machine  Technical Parameters
Model HP102
Crimping   range6-102mm(1/4"-4")
Max  Crimping  Force1400T
Rated     Pressure31.5Mpa
Weight 520kg
Mold   Quantity16  sets
Voltage380v or  customized
Scale   accuracy0.01mm
Overall  dimensions900*790*1070mm

Detailed Images                                                                                                  
HP102 Hose Hydraulic Clamping Press Fitting Hose Crimping Machines Tool
HP102 Hose Hydraulic Clamping Press Fitting Hose Crimping Machines Tool

Installation and Operation                                                                                

1. Add sufficiently 70 liters of Great Wall brand 46# anti-abrasion hydraulic oil. If the room temperature is lower than 10ºC, 10% transformer oil is need to add.
Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.
2. Regulating the scale
The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction), the scale can flexibly leave from the oil cylinder end cover. When releasing the scale, the scale will be recovered relying on spring force. Before the machine is turned on, inspect carefully if the scale telescoping is flexible and if the lead connection is reliable.
3. The primary scale is turned within 0 line of the secondary scale, turn the machine on for test run, and observe if all actions are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
4. Pressure regulation
The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder (see figure), when it is regulated clockwise, the pressure will increase, when it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory).
5. Operation 
Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same. These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.

Product Progress                                                                                           
HP102 Hose Hydraulic Clamping Press Fitting Hose Crimping Machines Tool

HP102 Hose Hydraulic Clamping Press Fitting Hose Crimping Machines Tool

Our service:

Pre-Sales Service

* Inquiry and consulting support.
* Sample testing support.
* View our Factory & Office.

After-Sales Service

* Warranty for 3 years.
* Training how to instal and use the machine.
* Provide free quick-wear part.
Payment Term:

Trade Assurance

* PAY to our company's USD bank transfer BY T/T.
* 100% product quality protection; 100% on-time shipment protection; 100% payment protection.


* 100% T/T in advance(normal models in stock).
* 50% T/T in advance, balance paid before delivery(for the customized models).

Our factory also have accept the payment by western union,paypal and money gram.

1.Question:Are you manufacturer or trading company?
Answer:We are manufacturer since 1997.

2.Question:Certificates ?

3.Question:Delivery time?
Answer:The machines arein stock now,can be delivered as you need.

4.Question:What is theMOQ?
Answer:1 set for you test.

5.Question:Can I get some discount ?
Yes, friend.The more you buy, the more you save.

6.Question:What is the payment?
Answer:T/T in advance,as most of our crimping machine model are in stock.
L/C,western union,paypal and money gram also can be accepted.

7.Question:Can you make customized designs or LOGO?
Of course, we are professional OEM manufacturer.

8.Question:Can I visit your factory?
Yes,you are warmly welcome to visit our factory anytime. Before the visiting, please contact us firstly and confirm the visiting time, our car can pick up you to our factory.


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours